User Created Content
Converts Daktronics AllSport 5000 serial RTD into JSON/MQTT over wired W5500 Ethernet (< 12 ms RTT), powering live graphics, signage and smart-arena automations
dakbot
lawrence0
53
0
Arduino Mega + W5500 create a transparent serial-to-Ethernet bridge with heartbeat, CLI setup, and EEPROM storage—ideal for retro-fitting legacy RS-232 gear.
UART-over-Ethernet-v2
lawrence0
59
0
This project demonstrates how to build a local smart home voice assistant using the XiaoZhi AI system with a WIZnet W5500 Ethernet controller.
How to Build a Smart Home Voice Assistant Using W5500 Ethernet and XiaoZhi AI?
gavinchang0
25
0
This project explains how to connect a XiaoZhi AI-based embedded device to a local server using the WIZnet W5500 Ethernet controller.
How to Connect XiaoZhi AI to a Local Server Using W5500 Ethernet?
gavinchang0
50
0
This project explains how to implement a web-based IoT control system using the WIZnet W5500 Ethernet controller.
How to Build a Web-Based IoT Control System Using W5500 Ethernet?
mark0
24
0
This project explains how to interface an STM32 microcontroller with the WIZnet W5500 Ethernet controller to implement stable TCP/IP networking.
How to Interface W5500 with STM32 for Reliable Ethernet Communication?
mark0
42
0
This project explains how to implement UDP-based communication on an embedded system using the WIZnet W5500 Ethernet controller.
How to Implement UDP Communication with W5500 for Embedded IoT Systems?
chen0
36
0
This project explains how to implement a TCP client/server communication system on an embedded platform using the WIZnet W5500 Ethernet controller.
How to Build a TCP Client/Server System with W5500 for Embedded IoT?
chen0
48
0
This project introduces how to build an embedded Ethernet communication system using the WIZnet W55MH32, a microcontroller-integrated Ethernet solution.
How to Build an Embedded Ethernet System Using W55MH32 for Industrial IoT?
ronpang0
25
0
This project introduces the use of the WIZnet W6300 Ethernet controller for embedded networking applications.
How to Use W6300 Ethernet Controller for High-Performance Embedded Networking?
ronpang0
21
0
BSB to lan
bsb lan
jaden0
45
0
ESP USBIP bridge
ESP USBIP bridge
jaden0
45
0
This project provides a modular, SPI-based Ethernet interface for the W5500 Ethernet controller, integrated with the lwIP TCP/IP stack and tailored for Arduino
(lwIP)
Sunny_0
36
0
ESP-Miner NerdQAxePlus V3.4 - TNA Edition LAN and OVERCLOCKING READY
ESP-Miner NerdQAxePlus V3.4 - TNA Edition LAN and OVERCLOCKING READY
scott0
57
0
.
Room thermostat
Sunny_0
30
0
An STM32F103-powered dev board in an Arduino UNO form factor
ARMduino
Sunny_0
36
0
grass-valley-gpio-controller
grass-valley-gpio-controller
Aimee00
51
0
MCM_GitHub_OTA Library
MCM_GitHub_OTA Library
scott0
64
0
Filla IQ
Filla IQ
Aimee00
127
0
RIT Launch Initiative OTIS project
RIT Launch Initiative OTIS project
Aimee00
27
0
drone_hass
drone_hass
Aimee00
30
0
no_std Rust library implementing Blackmagic ATEM UDP/BURP protocol for Embassy-based embedded systems. Enables MCUs with W5500 Ethernet to control professional
edge bmd atem
Lihan__0
41
0
padspanHA
padspanHA
Aimee00
23
0
W5500 Ethernet for Sharp X68000 (1987) via joystick port bit-banged SPI. inetd.x-compatible TCP/IP driver enables SMB, HTTPS, web browsing on vintage hardware.
joynetd
Lihan__0
40
0