UCC

STM32_FreeRTOS_W5500_TCP_Server

ESP32_W5500_device

servimetro-esp32

JWPLC Basic: An Open-Source Industrial PLC Board Package Built on ESP32 and W5500

Industrial Arduino-compatible controller with Ethernet, RS485, relays, and I/O for building automation, monitoring, and smart control applications.

lighting controller

An FPGA-based Slow Control Interlock System on a Cologne Chip GateMate FPGA that ingests measurement data over UDP via dual WIZnet W5500 modules (RX/TX).

W5500 streamline ethernet

The Hammer combines a 1W LoRa radio, W5500 Ethernet, PoE, and GPS to create a rugged Meshtastic-compatible mesh communication platform.

projectMM runs one 3D LED and DMX pipeline from ESP32 to desktop, using W5500 Ethernet on ESP32-S3 boards for large Art-Net lighting workloads.

Flaming Lotus Girls’ Haven uses distributed W5500-EVB-Pico lighting nodes and Embedded Rust to deliver Art-Net lighting across a 100-foot interactive sculpture

Every smart building needs a brain. For over 2,000 homes, apartments, and offices across Belgium, that brain is the IPBox

Dedicated PoE environmental sensors for server rooms and network closets — the kind that speak SNMP and integrate directly with PRTG and Zabbix

MGTS sends each photoelectric START and STOP event over ESP-NOW and W5500 UDP, then applies shared duplicate guards in an ESP32-C6 timing core.

CN120262698A places W5500 Ethernet beside STM32H743 edge diagnosis, adaptive sensing, wireless failover, and cloud-trained fault models.

This project combines an STM32F103C8T6, WIZnet W5500, and an MQTT client to publish and subscribe to messages through Alibaba Cloud IoT.

This Industrial IoT project uses Verilog FPGA logic to control a WIZnet W5500 through an 80 MHz SPI interface.

This commercial firmware architecture uses WIZnet W5500 with an STM32 microcontroller to perform HTTP-based remote firmware updates through In-Application Progr

This education-focused project uses Verilog FPGA logic to control a WIZnet W5500 as a multi-socket TCP client.

This education-focused project explains how to design a stable Ethernet interface around the WIZnet W5500 on an MCU board.

his project uses an FPGA programmed in Verilog to control a WIZnet W5500 Ethernet controller without relying on an MCU-based C driver.

This project uses an NXP LPC1758/LPC17xx microcontroller and WIZnet W5500 to implement an SNMPv2 agent for industrial device monitoring and management.

This commercial firmware architecture uses WIZnet W5500 on STM32 to implement a wired Ethernet MQTT client.

A Rust-based adaptor that exposes a Hamlib rotctld interface for network control of a G-5500 azimuth/elevation rotator.