UCC

This article defines address mapping, register mapping and remapping, which establish address indexing rules for all internal chip resources.

This article explains RP2040 DMA controller, its working modes, channel chaining, DREQ trigger mechanism and interrupt configuration.

This article details the Cortex-M0+ core adopted by RP2040, including its main features, supporting modules and applicable embedded scenarios.

This article introduces RP2040's dual-core processor subsystem, covering SIO, interrupts, event signals and SWD debug architecture.

This article explains RP2040's bus architecture and address mapping that govern internal data transmission and resource access.

This article defines pin multiplexing and explains how RP2040 GPIOs switch between different peripheral functions via function selection tables.

This article explains pin mapping and its vital roles in hardware design, coding and resource allocation using RP2040 as an example.

This article explains how to learn chips via block diagrams and introduces each functional module of RP2040 with a vivid miniature factory analogy.

This article introduces the naming rules of Raspberry Pi RP-series MCUs and explains how to decode core hardware parameters from RP2040 and RP2350 model numbers

This article explains XIP, a technology allowing MCUs to execute code directly from Flash instead of copying it to RAM, using Raspberry Pi Pico as an example.

UF2 (USB Flashing Format) developed by Microsoft is used for Raspberry Pi Pico firmware.

temp-snmp-pio

Railway vehicle lithium battery management system

A Bengbu University patent application links RS-485 sensors to a GD32F303CET6 gateway that packages data as MQTT and sends it through W5500 Ethernet.

A bench tool for stress-testing and validating Ethernet switch ports

An ESPHome component that reads Pylontech battery racks (US2000/3000/5000) over the console port, with optional W5500 wired Ethernet for stable monitoring.

A Bootloader That Refuses to Die: Firmware Recovery Over Ethernet, Served by a 92 KB Bootloader

A from-scratch RISC-V "computer" on FPGA (CPU + OS + software). The W5500 is driven by a custom FPGA SPI master, mapped into MMIO for Ethernet.

This DOE 20kW bidirectional wireless-charging truck used WIZnet Ethernet and industrial WiFi bridges to carry vehicle BMS status between two power-control DSPs

FSRI’s portable gas analyzer uses three WIZ750SR modules to network O₂, CO, and CO₂ sensors over TCP, with one PoE cable for power and data.

ESP32-ethernet-sensor-node

ESP32_AdBlocker_Reborn

ECU – ECUMain 1.1

Rust firmware targeting the Waveshare ESP32-S3-ETH board