Skip to content

TangNano_W5300_TOE_GOWIN

This is a verilog FSM project for controlling Wiznet W5300 IC using SiPeed TangNano 9k FPGA and TOE Shield board.

simons

Published September 03, 2023

Original author: Manuel Iglesias AbbatemarcoOriginal source (new tab)

TangNano_W5300_TOE_GOWIN

Components

Hardware components

Project description

This is a verilog FSM project for controlling Wiznet W5300 IC using SiPeed TangNano 9k FPGA and TOE Shield board. About the project. Quick summary The W5300 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems that require high network performance. W5300 IC Tang nano 9K is a development board based on Gowin GW1NR-9 FPGA chip. Tang Nano 9K The W5300 TOE Shield is a board that enables high-speed bus communication with the W5300 and ST's Cortex MCU. And Now to an FPGA too 😎 Wiznet TOE Shield This repository contains the verilog…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.