RAK13800 Ethernet Interface(W5100S-L)

praveen_k

Published May 25, 2022

Project description

To use a?RAK13800, you need to connect the module to the IO slot of a?WisBlock Base?Board. The?WisBlock Base?is the power supply for the?RAK13800?module. Furthermore, you need a?WisBlock Core?module, to control the module via software code. Youtube: https://www.youtube.com/watch?v=I4C2PiDHUV4

Documents

Documentation

Comments

Similar projects you might like

LoRa mesh networking platform designed to exchange text messages, location data, and telemetry without relying on Internet or cellular infrastructure

MESHCN Firmware: Extending an Off-Grid LoRa Mesh Network with W5100S Ethernet

sophia

Views 170
Comments 0

An nRF5340 IoT gateway funneling BLE data over W5100S wired Ethernet, with PoE for data and power on one cable.

repeat

Grace_Koo

Views 212
Comments 0

A 6-channel relay board by SB Components combining RP2040, WIZnet W5100S Ethernet, and RS485 for wired remote IO control in industrial environments.

GatePi-Ethernet-Software

Grace_Koo

Views 300
Comments 0

RAKWireless library for the RAK13800 Ethernet Module

RAK13800_W5100S_Ethernet_library

Sunny_

Views 256
Comments 0

MeshCom is a LoRa/APRS off-grid messaging network for amateur radio, extended through W5500/W5100S Ethernet gateways to HAMNET or IP networks.

MeshCom

matthew

Views 440
Comments 0

An ESP32-S3 industrial gateway combining RS485, Wi-Fi, and W5100S TOE Ethernet for Modbus TCP/RTU, web setup, MQTT, OTA, and hybrid edge control.

esp32s3 modbus gateway gemini

matthew

Views 756
Comments 0

Open-source KiCad PCB acting as a power distribution and SPI hub motherboard for W5100S/W5500-EVB-Pico, driving six LED lamp units in a university building-scal

Powering 57,000 LEDs: A Custom Motherboard for W5500-EVB-Pico

Benjamin

Views 510
Comments 0

Comments