khoih-prog / ESP_AT_Lib

This ESP_AT_Lib library currently supports these following boards:

nRF52 boards, such as AdaFruit Feather nRF52832, nRF52840 Express, BlueFruit Sense, Itsy-Bitsy nRF52840 Express, Metro nRF52840 Express, NINA_B302_ublox, NINA_B112_ublox, etc.

SAM DUE

SAMD21

• Arduino SAMD21: ZERO, MKRs, NANO_33_IOT, etc.
• Adafruit SAMD21 (M0): ItsyBitsy M0, Feather M0, Feather M0 Express, Metro M0 Express, Circuit Playground Express, Trinket M0, PIRkey, Hallowing M0, Crickit M0, etc.
• Seeeduino: LoRaWAN, Zero, Femto M0, XIAO M0, Wio GPS Board, etc.

1. SAMD51

• Adafruit SAMD51 (M4): Metro M4, Grand Central M4, ItsyBitsy M4, Feather M4 Express, Trellis M4, Metro M4 AirLift Lite, MONSTER M4SK Express, Hallowing M4, etc.
• Seeeduino: Wio Terminal, Grove UI Wireless

Teensy (4.1, 4.0, 3.6, 3.5, 3,2, 3.1, 3.0, LC)

STM32F/L/H/G/WB/MP1 boards (with 64+K Flash)

• Nucleo-144
• Nucleo-64
• Discovery
• Generic STM32F0, STM32F1, STM32F2, STM32F3, STM32F4, STM32F7 (with 64+K Flash): x8 and up
• STM32L0, STM32L1, STM32L4, STM32L5
• STM32G0, STM32G4
• STM32H7
• STM32WB
• STM32MP1
• LoRa boards
• 3-D printer boards
• Generic Flight Controllers
• Midatronics boards

SIPEED_MAIX_DUINO boards

RP2040-based boards, such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040 using Earle Philhower's arduino-pico core v1.4.0+ or Arduino-mbed RP2040 core.

RP2040-based boards, such as Nano_RP2040_Connect using Arduino-mbed RP2040 core.

WIZNET_WIZFI360_EVB_PICO using Earle Philhower's arduino-pico core

WIZNET_WIZFI360_EVB_PICO

Currently Supported AT-command shields

1. ESP8266-AT-command shield
2. ESP32-AT-command shield
3. W600 and WIS600-01S AT-command shield
4. WizFi360 AT-command shield

WIZFI360

Prerequisites

1. Arduino IDE 1.8.19+ for Arduino.
2. Arduino AVR core 1.8.6+ for Arduino (Use Arduino Board Manager) for AVR boards.
3. Arduino Core for STM32 v2.4.0+ for STM32F/L/H/G/WB/MP1 boards (Nucleo-144 NUCLEO_F767ZI, Nucleo-64 NUCLEO_L053R8, etc.).
4. Teensy core v1.57+ for Teensy 4.1.
5. Arduino SAM DUE core v1.6.12+ for SAM DUE ARM Cortex-M3 boards.
6. Arduino SAMD core 1.8.13+ for SAMD ARM Cortex-M0+ boards.
7. Adafruit SAMD core 1.7.11+ for SAMD ARM Cortex-M0+ and M4 boards (Nano 33 IoT, etc.).
8. Seeeduino SAMD core 1.8.3+ for SAMD21/SAMD51 boards (XIAO M0, Wio Terminal, etc.).
9. Adafruit nRF52 v1.3.0 for nRF52 boards such as Adafruit NRF52840_FEATHER, NRF52832_FEATHER, NRF52840_FEATHER_SENSE, NRF52840_ITSYBITSY, NRF52840_CIRCUITPLAY, NRF52840_CLUE, NRF52840_METRO, NRF52840_PCA10056, PARTICLE_XENON, NINA_B302_ublox, etc.
10. Arduino mbed_rp2040 core 3.5.4+ for Arduino RP2040-based boards, such as Arduino Nano RP2040 Connect, RASPBERRY_PI_PICO, etc..
11. Earle Philhower's arduino-pico core v2.7.1+ for RP2040-based boards such as RASPBERRY_PI_PICO, ADAFRUIT_FEATHER_RP2040 and GENERIC_RP2040, etc.
12. Ai-Thinker AT Firmware v1.5.4 or AT Firmware v1.7.4.0 for ESP8266-AT shields.
13. AT version_2.1.0.0_dev for ESP32-AT shields.
14. AT version_1.1.4 for WIS600-01S and W600-AT WiFi shields
15. AT version:1.1.1.7 for WizFi360 WiFi shields