W6300-EVB-Pico2-Library

jaden

Published May 29, 2026

Original author: jmvargascruzOriginal source (new tab)

Project description

How to Accelerate Hardware Design for W6300-EVB-Pico2 with KiCad Libraries? Summary The W6300-EVB-Pico2-Library project provides hardware design resources for developers building Ethernet-enabled systems around the W6300-EVB-Pico2 platform. While software libraries often receive the most attention, accessible hardware libraries can significantly reduce development effort by simplifying schematic capture and PCB design. By distributing KiCad-compatible design assets, the project lowers the barrier to entry for both hobbyists and professional engineers who want to adopt WIZnet Ethernet…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

SSH Stamp turns W6300-EVB-Pico2 into a secure UART bridge and improves MACRAW reliability for Embassy.

SSH Stamp: Secure Remote UART Access with W6300-EVB-Pico2

Grace_Koo

Views 122
Comments 0

W5500/W6100 support in ESP-IDF opens the door for deeper WIZnet–Espressif collaboration, including Hardwired TCP/IP and W6300.

Espressif Adds Official W6100 Ethernet Driver Support to ESP-IDF

jakelee

Views 253
Comments 0

WebSocket on a WIZnet ESP SoM. TCP runs on the Ethernet chip, not the MCU. Same firmware on W5500 or W6300 - one menuconfig switch, no porting.

WebSocket on the WIZnet ESP SoM: the MCU never runs TCP

TheoIm

Views 332
Comments 0

Modbus TCP slave plus a live web dashboard on a WIZnet ESP SoM. Change the IP from the browser. Same firmware on W5500 or W6300, one menuconfig switch.

Modbus TCP on the WIZnet ESP SoM, re-addressable from a browser

TheoIm

Views 326
Comments 0

Waveshare's RP2350-POE-ETH pairs the dual-core RP2350A with WIZnet's W6300 hardwired TCP/IP controller and an onboard RJ45, with optional 802.3af PoE.

Waveshare RP2350-POE-ETH: RP2350A + WIZnet W6300 Ethernet Board with Optional PoE

ElenaLee

Views 169
Comments 0

The plc-comm-slmp-cpp-minimal project implements Mitsubishi Electric MELSEC SLMP Binary 3E and 4E communication for embedded C++ systems

How to Connect MELSEC PLCs with Binary SLMP 3E/4E on W6300-EVB-Pico2?

viktor

Views 188
Comments 0

A production-grade firmware architecture that brings together MQTT, Wiegand readers, RS485 devices, I2C LCD, RTC, and SD card storage — all running on a single

Building an Industrial Access Control Gateway with WIZnet W6300-EVB-Pico2

lawrence

Views 565
Comments 0