Remote monitoring of automatic irrigation systems and utilization of UECS

UECS

jaden

Published July 31, 2025

133 UCC

18 WCC

55 VAR

Original author: masaki kohei · JapanOriginal source (new tab)

Components

Hardware components

WIZnet - W55RP20-EVB-Pico

x 1

Project description

🌱 Real-World Use Case of W55RP20-EVB-PICO in Smart Agriculture Hello Community! Today, I’d like to share an exciting case presented at the 2025 Annual Conference of the Agricultural Informatics Society (Kyoto University, May 25, 2025). In this project, the W55RP20-EVB-PICO board by WIZnet played a key role in building a low-cost, remote irrigation monitoring system 📌 The Problem: Irrigation Takes Too Much Time In farming, watering crops may sound simple, but it’s actually very labor-intensive. With the aging population and labor shortage in agriculture, automation is in high demand…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

The W55RP20-S2E operates as an MQTTS client, connects securely to AWS IoT Core, and publishes and subscribes to configured topics.

ioNIC AWS MQTTS Client Arduino Example

Grace_Koo

Views 540
Comments 0

The W55RP20-S2E operates as an MQTT client and publishes messages to, and subscribes to topics from, an MQTT broker.

ioNIC MQTT Client Arduino Example

Grace_Koo

Views 577
Comments 0

The W55RP20-S2E is configured in SSL client mode via the UART or SPI interface and operates to exchange data with an OpenSSL server running on a PC.

ioNIC SSL Client Arduino Example

Grace_Koo

Views 508
Comments 0

The W55RP20-S2E is configured in HTTP Server mode via UART or SPI and operates to provide web pages when accessed from a PC.

ioNIC Web Server Arduino Example

Grace_Koo

Views 531
Comments 0

The W55RP20-S2E is configured as an HTTP client via UART or SPI, enabling it to send GET requests to an HTTP server and receive responses.

ioNIC HTTP Client Arduino Example

Grace_Koo

Views 497
Comments 0

This guide explains how to control the W55RP20-S2E module using a Raspberry Pi Pico and implement network loopback functionality.

ioNIC Loopback Arduino Example

Grace_Koo

Views 520
Comments 0

Example for configuring W55RP20-S2E by sending commands entered through USB serial from Pico via (UART/SPI)

ioNIC AT command Arduino Example

Grace_Koo

Views 514
Comments 0