It is an ioT module manufactured with Cubix technology and can be applied to various ioT devices and service implementations.
3
WIZnet - W5500
x 1
WIZnet - WIZ850io
x 1
The company can apply customized modules for the customer's IoT system.
Ethernet teleoperation, a ROS 2 command bridge and CAN-connected robot control for a 2026 NHK Kosen Robocon team
robo-con-for-Ethernet: W5500 TOE for ROS 2-Connected Robot Control
lawrence
Views 10
Comments 0
A prototype actuator test bench where an STM32 NUCLEO-F446RE uses a WIZ550IO (W5500) as a Modbus TCP server for a CLICK PLUS PLC, plus a Python HMI.
Aircraft Actuator Test Platform: STM32 and W5500 Modbus TCP Link to a CLICK PLC
josephsr
Views 15
Comments 0
Tripwire Firmware extends Batear with new node roles, XIAO hardware support, relay-aware packets, and W5500 Ethernet for flexible drone detection networks.
Tripwire Firmware: Extending Batear with New Nodes and Relay-Aware Communication
irina
Views 17
Comments 0
An STM32F401 Tracking Box decodes serial/RS-485 camera and lens data, generates Free-D packets, and sends them over Ethernet through a WIZnet W5500.
Broadcast Camera Tracking Gateway: STM32F401 and W5500 Free-D Tracking Box
josephsr
Views 14
Comments 0
Firefly Luciferin: A Real-Time Ambient Lighting System Using ESP32 and W5500 SPI Ethernet
Firefly Luciferin: A Real-Time Ambient Lighting System Using ESP32 and W5500 SPI Ethernet
Aimee0
Views 17
Comments 0
Upstream MicroPython fix keeps an active W5500's SPI bus alive through soft reset on STM32 with lwIP, qualified with 60 resets and 20 upload cycles.
Why Did a MicroPython Soft Reset Hang an STM32 with a W5500, and How Does PR #19800 Fix It?
ElenaLee
Views 34
Comments 0
Open-source gateway reads an Amphenol Wilcoxon 883M vibration sensor over RS-485 and serves a PLC, MQTT and a web dashboard through the IRIV's W5500 Ethernet.
How Does a W5500 on the Cytron IRIV Turn a Wilcoxon 883M Vibration Sensor into a PLC-Ready Node?
ElenaLee
Views 44
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?