[WIZ750SR] I can not module searching with the configuration tool.

Question

The symptom of not searching in Configuration tool is as follows. Set the virtual machine(virtual box) to disabled. Control Panel - Network and Sharing Center - You can see the list of networks connected to your PC when you change the adapter settings. From there, set all of your virtual machines to “Disable”. And search again with the configuration tool. Disable Wi-Fi on your PC. Go to Control Panel - Network and Sharing Center - Change the adapter settings and set Wi-Fi to “Disable”. And search again with the configuration tool. It doesn’t solve search, the workaround is to check the following: Make sure that the LAN cable is working properly. Check that the LAN cable is defective. If there is no problem with the LAN cable, connect the product directly to the PC 1:1 and search with the configuration tool. If it is search, check the connected network structure. When testing in a corporate network area, If can block the search IP / Port of the configuration tool in the corporate network system. Please check this part. The configuration tool uses ports 50001 and 50002. If not, check the switch (router). Please check if the router is working. There is a possibility that the LAN port of the router is broken. Please replace it with another router.

rena · Answer

For the new S2E Configuration Tool(wizconfig), please refer to below FAQ link. Configuration Tool Wiki FAQ image800×669 131 KB