Skip to content

[Blog Post UCC Sample] 주파수 혼선 없는 무선 탈리 만들기(Create a 2.4GHz wireless tally)

Tally Controller is connected to ATEM switcher (Multi-camera production switcher)

eric_g

Published October 19, 2022 · © MIT license (MIT)

Original author: 니나농 · South KoreaOriginal source (new tab)

[Blog Post UCC Sample] 주파수 혼선 없는 무선 탈리 만들기(Create a 2.4GHz wireless tally)

Components

Hardware components


Project description

This is a wireless tally lighting control board production project spanning a total of 5 postings.

Reference

Tally light is a small signal-lamp on a professional video camera or monitor. It is usually located just above the lens or on the electronic viewfinder and communicates, for the benefit of those in front of the camera as well we the camera operator, that the camera is 'live' - i.e. its signal is being used for the 'main program' at that moment 
(by WIKIPEDIA, https://en.wikipedia.org/wiki/Tally_light)

What is Tally?

Tally Controller is connected to ATEM switcher (Multi-camera production switcher). ATEM basically supports wire interfaces to control the camera. Tally Controller can extend the wireless connection for multi-camera devices.

[Blog Post UCC Sample] 주파수 혼선 없는 무선 탈리 만들기(Create a 2.4GHz wireless tally)

In this project, 

the author by himself designed Tally Controller PCB and assembled it. There is one main module, ESP32-WROOM-32, and 2 network modules; LoRa & W5500.

[Blog Post UCC Sample] 주파수 혼선 없는 무선 탈리 만들기(Create a 2.4GHz wireless tally)
[Blog Post UCC Sample] 주파수 혼선 없는 무선 탈리 만들기(Create a 2.4GHz wireless tally)
[Blog Post UCC Sample] 주파수 혼선 없는 무선 탈리 만들기(Create a 2.4GHz wireless tally)

 

Original link: https://blog.naver.com/PostView.naver?blogId=dhtpals32123&logNo=222752065493&parentCategoryNo=&categoryNo=26&viewDate=&isShowPopularPosts=false&from=postList

Comments

Comments