Skip to content

How to handle interrupts on HTTP requests on the W6300-EVB-Pico

Implementing Interrupt-Driven Handling on HTTP Requests with W6300-EVB-Pico

bruno

Published October 15, 2025

Original author: namo02268Original source (new tab)

How to handle interrupts on HTTP requests on the W6300-EVB-Pico

Project description

How to Build a Deterministic Interrupt-Driven HTTP Server with W6300 on RP2040? Summary This project demonstrates how to implement event-driven Ethernet networking on the W6300-EVB-Pico by wiring the W6300 INTn hardware signal to the RP2040 GPIO interrupt system. Instead of polling socket registers, the firmware reacts only when the W6300 TCP/IP Offload Engine (TOE) asserts a hardware interrupt. This architecture provides bounded response latency, protects RTOS scheduling predictability, and enables clean dual-stack (IPv4/IPv6) HTTP server design on resource-constrained MCUs. What the…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like