Skip to content

VCON

VCON is a framework for remote (OTA) firmware updates and remote serial monitor, for a wide range of microcontrollers.

austin

Published May 03, 2023

44 UCC

3 WCC

13 VAR

1 Followers

Original source (new tab)

VCON

Components

Hardware components
W5500-EVB-Pico

WIZnet - W5500-EVB-Pico

x 1

Project description

VCON module: ESP32C3 XIAO Target (Host) board: W5500-EVB-PICO In this setup, it is ESP32C3 that powers both boards over USB. After the setup is done, it could the vica versa: the RPI board can power both. Configuration using GUI Once wiring is done, go to https://dash.vcon.io and select "action" → "Manage device" to configure the Host. This loads device management console with several different sections. Now we're interested in "Configuration" section. Change values to make it look like this and hit "save": Configuration using API The following console command performs the same setup as the…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like