RP2350 RFID TCP Controller with W6300 Ethernet
NFC/RFID card reader on RP2350 + W6300 that sends card UIDs over TCP with a built-in web configuration UI
0
Components
Hardware components
Adafruit - NeoPixel Ring: WS2812 5050 RGB LED
x 1
WIZnet - W6300-EVB-Pico2
x 1
WIZnet - WIZnet io Library
x 1
platformio - PlatformIO Core
x 1
Project description
W6300 and RP2350: The Next Generation The W6300 is WIZnet's next-generation Ethernet controller, the successor to the widely used W5500. It adds QSPI interface support for faster communication with the host MCU, while maintaining the same hardwired TCP/IP offload architecture. Similarly, the RP2350 (Raspberry Pi Pico 2) upgrades the RP2040 with a faster Cortex-M33 core and more memory. German maker Tom Kiehl (torion7) has built a project that puts this next-gen combination to work: an NFC/RFID card reader that sends card UIDs over TCP, with a full web-based configuration interface. What It…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
