Skip to content

How to Build a Dual-Ethernet Gateway with W5500 on Raspberry Pi Pico?

This project turns a Raspberry Pi Pico-class RP2040 design into a dual-port wired Ethernet board using two WIZnet W5500 controllers

viktor

Published February 26, 2026

Original author: Dan NixonOriginal source (new tab)

How to Build a Dual-Ethernet Gateway with W5500 on Raspberry Pi Pico?

Components

Hardware components

Project description

Summary This project turns a Raspberry Pi Pico-class RP2040 design into a dual-port wired Ethernet board using two WIZnet W5500 controllers, with one port intended for PoE-backed deployment. In the supplied Rust demo firmware, each W5500 becomes a separate SPI-attached Ethernet interface for an Embassy-based network stack, while the application demonstrates DHCP bring-up, TCP data handling across two ports, NTP time sync, and local status display on an SSD1306 OLED. Source: https://github.com/DanNixon/pi-pico-dual-ethernet What the Project Does The hardware is a Pi Pico dual-Ethernet board…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like