Skip to content

Fix for ratty behaviour of Wiznet 5200 with the OpenKontrol Gateway

Fix for ratty behaviour of Wiznet 5200 with the OpenKontrol Gateway

wiz_chandana

Published July 04, 2022

44 UCC

22 VAR

Original source (new tab)

Components

Hardware components

OpenKontrol Gateway

x 1

Open Kontrol Gateway (OKG)

x 1

Wiznet W5200

x 1

Project description

Using OKG with Wiznet W5200 The Wiznet W5200 is an advanced Ethernet chip which has an integrated TCP/IP stack. It's almost identical to the Wiznet W5100 which is used in official Arduino Ethernet boards. The Wiznet W5200 works with the standard Arduino Ethernet library with a small change. To use the OKG with the Wiznet W5200 as an emonBase to receive data from an emonTx via RFM12B and post to emoncms follow these steps: Assemble the OKG baseboard following the Ciseco instructions on the OpenMicros - assembling the OKG. For emonBase operation, the position of the jumpers doesn't matter…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.