Network-attached PDU (Power Distribution Unit) controller for the Raspberry Pi Pico (RP2040), replacing the original PIC18-based firmware.
CroPDUster: Open-Source Network-Attached PDU Control with WIZnet Ethernet
viktor
Views 266
Comments 0
UCC
User Created Content: projects that makers and community members built with WIZnet chips and modules.
5,463 projects
WIZ750SR firmware moves from Keil to GNU ARM GCC and CMake, enabling reproducible open builds and easier community contribution.
gcc-cmake-build-wiz750sr
TheoImViews 290
Comments 0
.Built on MC68LC060 and Kintex-7 FPGA, the board combines legacy 68k computing with PCIe, DDR3, and extensive I/O for developers.
A2560Me Mini-ITX Retro Motherboard with 68k CPU and FPGA
Lihan__Views 234
Comments 0
This STC32G12K128 project uses the WIZnet W5500 Ethernet controller to obtain an IP address automatically through DHCP.
How to Use DHCP with WIZnet W5500 on STC32G12K128?
gavinchangViews 292
Comments 0
This STM32F10x education project demonstrates UDP multicast using the WIZnet W5500 Ethernet controller and WIZnet ioLibrary.
How to Build UDP Multicast with WIZnet W5500 on STM32F10x?
gavinchangViews 332
Comments 0
A lightweight SIP registrar/proxy server running on ESP32-S3, with W5500 Ethernet/PoE support for building small wired VoIP networks.
SipServer
matthewViews 878
Comments 0
An STM32F103 OTA bootloader that downloads firmware over W5500 Ethernet, stages it in W25Q64 flash, and installs it after CRC validation.
STM32_OTA_Bootloader_W5500
matthewViews 541
Comments 0
ESP32 firmware for JSY meters with dashboard, UDP, REST, Shelly emulation, and W5500 Ethernet builds.
ESP32 JSY Energy Meter Gateway with W5500 Support
BenjaminViews 486
Comments 0
A Web Serial flasher for QGate ESP32-S3 firmware with W5500 Ethernet, MQTT, NTP, and OTA evidence.
QGate Browser Flasher for ESP32-S3 and W5500 Ethernet
BenjaminViews 288
Comments 0
ArtNet → WS2811 bridge for WIZnet W6300-EVB-Pico2 — 8 parallel LED universes via RP2350 PIO + DMA
ArtNet_Pico2_WS2811
Lihan__Views 295
Comments 0
farm_env_sensor
farm_env_sensor
lawrenceViews 519
Comments 0
MicroNet is a lightweight network connection manager library for Arduino and PlatformIO
MicroNet
lawrenceViews 292
Comments 0
Identity Protocol - Part 10 - W5500 Ethernet
Identity Protocol - Part 10 - W5500 Ethernet
gunnViews 298
Comments 0
A bare-metal STM32 device uses WIZnet W5500 Ethernet and timer-based UDP RTT measurement to visualize WAN latency and jitter.
Hardware WAN Latency Analyzer with STM32 and WIZnet W5500
josephsrViews 288
Comments 0
DINO-PLC-V2
DINO-PLC-V2
scottViews 386
Comments 0
.
The New Packet Radio
Sunny_Views 193
Comments 0
.
Reference-FPGA-System
Sunny_Views 206
Comments 0
Art-Net Receiver for Arduino Megas
EthernetToDMX
Sunny_Views 210
Comments 0
ESP32S3 W5500 ETHERCAT SOES
ESP32S3 W5500 ETHERCAT SOES
scottViews 470
Comments 0
Artnet Node for WS2812B (RP2040 Based, 4 Universe)
Artnet Node for WS2812B (RP2040 Based, 4 Universe)
scottViews 350
Comments 0
A lightweight W5500 Ethernet library for STM32 microcontrollers, compatible with the official STM32duino Arduino core. Built and tested on STM32F446RE
W5500Ethernet
Lihan__Views 486
Comments 0
This STC32G12K128 project uses the WIZnet W5500 Ethernet controller to expose a small local TCP server that can be accessed from a web browser.
How to Build a Static-IP TCP Server with W5500 on STC32G12K128?
markViews 266
Comments 0
This STC32G12K128 project connects a low-cost 8051-family MCU to Ethernet using the WIZnet W5500 controller.
How to Build a TCP Client with W5500 on STC32G12K128?
markViews 235
Comments 0
This STM32F10x project demonstrates UDP communication with the WIZnet W5500 Ethernet controller using WIZnet ioLibrary.
How to Build an 8-Socket UDP Client/Server Model with W5500 on STM32F10x?
ArnoldViews 298
Comments 0
