A server-side Ethernet design uses a primary path, a standby path, and fault detection to reduce service interruption during link or switch failure.
Dual-Link Ethernet Redundancy Circuit
josephsr
Views 320

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,102 projects
A server-side Ethernet design uses a primary path, a standby path, and fault detection to reduce service interruption during link or switch failure.
Dual-Link Ethernet Redundancy Circuit
josephsrViews 320
Comments 0
HomeThread combines a Thread Border Router, Ethernet backhaul, and dashboard control for embedded home network management.
HomeThread: Embedded Thread Border Router with Ethernet Backhaul and Dashboard
josephsrViews 476
Comments 0
Remote lens control with mini servo and OSC
Remote lens control with mini servo and OSCRemote lens control with mini servo and OSC
irinaViews 375
Comments 0
Tutorial-W6300-EVB-PICO2
Tutorial-W6300-EVB-PICO2
matthewViews 407
Comments 0
W6300-EVB-PICO2 board streaming OV2640 camera images to Adafruit IO for real-time web dashboard viewing.
Build an Ethernet-Powered IoT Camera with HTTPS / MQTT
matthewViews 374
Comments 0
ESP32-C3 signal tower controller for infrastructure alerts: ESPHome-based logic, heartbeat supervision, and validated W5500 Ethernet for wired status indication
ESP32 Industrial Signal Tower Controller
matthewViews 459
Comments 0
Arduino Ethernet
Energy Management Model for Griffith Foods in Costa Rica, based on ISO 50001:2018
brunoViews 335
Comments 0
High-precision NTP server on ESP32 + W5500 using GPS PPS discipline, MCPWM hardware capture, and ARP-aware transmit timing
GPS-Disciplined Stratum-1 NTP Server with W5500 Hardware Timestamping
BenjaminViews 550
Comments 0
A complete IoT-based cashless canteen system using Arduino Nano + W5500 for secure card provisioning and ESP32 Wi-Fi for wireless payment processing.
PUSIT: RFID Canteen Payment System Powered by W5500 Ethernet and ESP32 Wi-Fi
BenjaminViews 550
Comments 0
W5500 Encorder
W5500 Encorder
jadenViews 345
Comments 0
Weather-Station-IOT-Project
Weather-Station-IOT-Project
masonViews 330
Comments 0
STM32 + W5500 이더넷 칩 설정을 통한 MQTT 통신 구현 Implementation of MQTT Communication via STM32 + W5500 Ethernet Chip Configuration (Part 2)
STM32+W5500以太网芯片配置实现MQTT通讯(二)
gunnViews 346
Comments 0
eBUS Adapter Shield v5
eBUS Adapter Shield v5
gunnViews 491
Comments 0
his project explains the network architecture and source code structure of the .mkit-web HTTP service used in the MIoTKit ecosystem.
How to Build an Industrial IoT HTTP Service with MIoTKit and W5500 Ethernet?
markViews 444
Comments 0
ArduinoIDE環境でW5500-EVB-PICOを使う サンプルスケッチ
ArduinoIDE環境でW5500-EVB-PICOを使う サンプルスケッチ
scottViews 562
Comments 0
This project explains how an embedded device can implement MQTT communication using the WIZnet W5500 Ethernet controller.
How to Implement MQTT Communication with W5500 Ethernet for Embedded IoT Devices?
markViews 479
Comments 0
Teensy 3.2 reads pulse/hand sensors, drives solenoid timing, and sends OSC over UDP via WIZ850io or WiFi (ESP8266). Static IP 188.0.1.x. UDP
PulseTank_osc
TheoImViews 530
Comments 0
This project demonstrates how to build a local smart home voice assistant using the XiaoZhi AI system with a WIZnet W5500 Ethernet controller.
How to Build a Smart Home Voice Assistant Using W5500 Ethernet and XiaoZhi AI?
gavinchangViews 568
Comments 0
This project explores how a local AI assistant system can achieve stable network connectivity using the WIZnet W5500 Ethernet controller.
How to Improve Local AI Device Networking Stability Using W5500 Ethernet?
gavinchangViews 663
Comments 0
pzem energy monitor firmware
energy monitor firmware
Sunny_Views 522
Comments 0
This project demonstrates how an embedded device connects to an EMQX MQTT broker using the MIoTKit framework with a WIZnet W5500 Ethernet controller.
How to Connect MIoTKit Devices to an EMQX MQTT Broker with TLS Using W5500 Ethernet?
chenViews 501
Comments 0
This project demonstrates how an embedded device connects to the Alibaba Cloud IoT platform using the MIoTKit framework with a WIZnet W5500 Ethernet controller.
How to Connect MIoTKit Devices to Alibaba Cloud Using W5500 Ethernet for Industrial IoT?
chenViews 474
Comments 0
https://github.com/IDTenev/water_link
water_link
Grace_KooViews 537
Comments 0
This project demonstrates how a microcontroller can send telemetry data to an MQTT broker over wired Ethernet using the WIZnet W5500 Ethernet controller.
How to Build an Ethernet-Based MQTT IoT Node with W5500 for Industrial Monitoring?
ArnoldViews 653
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?