I built an Arduino shield with WIZnet + ADI ADIN1101 — looking for feedback and use cases
I built an Arduino shield with WIZnet + ADI ADIN1101 — looking for feedback and use cases
gunn
Views 296

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,084 projects
I built an Arduino shield with WIZnet + ADI ADIN1101 — looking for feedback and use cases
I built an Arduino shield with WIZnet + ADI ADIN1101 — looking for feedback and use cases
gunnViews 296
Comments 0
esphome-haierac-ethernet
esphome-haierac-ethernet
masonViews 1014
Comments 0
ESP32-S3-based Solar2MQTT uses W5500 Ethernet to reliably collect inverter data and transmit it via MQTT to Home Assistant without Wi-Fi interruptions.
Solar2MQTT: High-Reliability Solar Monitoring via ESP32-S3 Ethernet
irinaViews 341
Comments 0
open-ot-security
open-ot-security
Aimee0Views 286
Comments 0
esp32-controller
esp32-controller
masonViews 1153
Comments 0
A gateway-centered design that bridges ESP-NOW switch nodes to MQTT and Home Assistant through an ESP32 with a WIZnet W5500 Ethernet interface.
ESP-NOW Gateway for Home Assistant over W5500 Ethernet
josephsrViews 474
Comments 0
Plum-ESPHome-RfBridge
Plum-ESPHome-RfBridge
Aimee0Views 284
Comments 0
Matter commissioner/controller GUI app for the Tanmatsu (ESP32-P4)
tanmatsu-matter
Lihan__Views 559
Comments 0
esp32-12ch-eth
esp32-12ch-eth
masonViews 959
Comments 0
ESP32 - Solar Power Monitoring 2 PZEM-017 PZEM-004T Via Websocket Server | Ethernet W5500 | Arduino
ESP32 - Solar Power Monitoring 2 PZEM-017 PZEM-004T Via Websocket Server | Ethernet W5500 | Arduino
masonViews 783
Comments 0
A software EtherCAT slave built with ESP32-S3 and WIZnet W5500. No dedicated ESC chip needed — raw frames processed in software via SOES stack.
ESP32S3_W5500_SOES
Grace_KooViews 583
Comments 0
太陽と月の部屋 Sun and Moon Room
太陽と月の部屋 Sun and Moon Room
scottViews 389
Comments 0
Computational Science and Computatoinal Intelligence
Computational Science and Computatoinal Intelligence
gunnViews 233
Comments 0
Airplay Esp32
airplay-esp32
gunnViews 625
Comments 0
Vaillant eloBLOCK & atmoTEC를 Smart Home에 통합하기 — eBUS, ebusd, Home Assistant
Vaillant eloBLOCK и atmoTEC в умном доме: интеграция через eBUS, ebusd и Home Assistant
gunnViews 285
Comments 0
GHRA outlines a ROS2 control stack for a rail-mounted AC trolley, combining ESP32 edge nodes, WIZnet W5500 Ethernet, a VFD, and a secured web dashboard.
GHRA: A ROS2-Based Rail Trolley Control Stack with WIZnet Ethernet and micro-ROS
josephsrViews 268
Comments 0
Positional Pneumatic Actuator Development for a Coordinate Mechanism with Long-Stroke Movements and Improved Operational Characteristics
Positional Pneumatic Actuator Development for a Coordinate Mechanism with Long-Stroke Movements...
brunoViews 493
Comments 0
"얼굴 인식 및 음성 제어 기능을 갖춘 지능형 출입 통제 시스템" 프로젝트는 사람의 얼굴을 자동으로 인식하여 건물이나 방의 출입을 허용하는 스마트 도어 시스템을 개발하는 것을 목표로 합니다.
Intelligent Door Access System with Facial Recognition and Voice Control
Sunny_Views 266
Comments 0
The growing adoption of electric vehicles (EVs) poses a significant challenge for recycling their batteries
Robotic Agentic Platform for Intelligent Electric Vehicle Disassembly
brunoViews 532
Comments 0
This project turns a Raspberry Pi Pico 2 into a networked wheel encoder node.
How to Send Wheel Encoder Counts with W5500 on Raspberry Pi Pico 2?
viktorViews 304
Comments 0
This project shows how to bring up the Particle Muon M524 with its onboard WIZnet W5500 Ethernet path as the preferred network interface for Particle Cloud.
How to Use W5500 Ethernet as the Primary Network Interface on Particle Muon?
viktorViews 540
Comments 0
ControllersTech is a well-known embedded tutorial platform focused on STM32 and MCU development, offering step-by-step guides and YouTube videos.
ControllersTech Shows How W5500 Enables Reliable Ethernet on STM32 from DHCP to MQTT
jakeleeViews 403
Comments 0
esp32 w5500 gateway modbus
esp32 w5500 gateway modbus
gunnViews 440
Comments 0
# STM32 Ethernet board
# STM32 Ethernet board
gunnViews 286
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?