Wiznet makers

This project implements a slow-control and interlock pipeline on a Cologne Chip GateMate M1A1 FPGA, using WIZnet W5500 devices as the Ethernet

Apache Mynewt is a modular RTOS platform for microcontrollers, built around a preemptive kernel, package-based builds, and remote device management tools.

W6300 Low level Link speed tes

ProsecCoAP + Low-Level Link Speed Tests 프로젝트 분석

RoboPro2026 Ethernet_Yoshiharu

CircuitBase

T.E.E.M.O is an ESP32-S3 CanSat platform combining 433 MHz telemetry, thermal logging, and a W5500 Ethernet camera link for mission-grade student avionics.

A Linux kernel training repository that connects platform binding, SPI Ethernet integration, and a minimal filesystem through staged driver exercises.

RetroBox

ESP32 handheld SD browser with OLED UI and a partial W5500 Ethernet offload path for TCP file transfer; novel embedded utility, but not a TOE-based design.

SinricPro_Generic

Minimal C++ library for ESP32/RP2040 to communicate with Mitsubishi PLCs via SLMP 4E protocol. Supports W5500 Ethernet for stable factory connections. Arduino &

ESP32-C6 bridges Art-Net DMX to Zigbee smart lights via W5500 Ethernet. Offloads UDP/6454 reception to free RF for Zigbee. Web UI for DMX patch & group config.

Open-source KiCad PCB acting as a power distribution and SPI hub motherboard for W5100S/W5500-EVB-Pico, driving six LED lamp units in a university building-scal

DMX512 is one of the most widely used protocols in lighting control

This project describes a maker-oriented edge-device architecture that combines the W5500 with local encryption and integrity checks so an MCU-class system can k

This article describes a maker-oriented edge gateway design that uses the W5500 to run a local TCP server with an emphasis on low latency,

This project is a compact W5500 porting note focused on bringing up a basic network stack on an MCU by transplanting WIZnet’s official driver files, adding a ha

This project shows how to bring up the W5500 as a TCP server on an AG32VF407 board by transplanting a simple W5500 socket example, adding board-specific GPIO an

This source is a hardware-and-protocol primer for the W5500 rather than a complete application project.

This project uses an STM32F103C8T6 with a W5500 Ethernet controller to build a small wired networking platform that can run UDP, TCP server, TCP client, MQTT

This project discusses the design of an embedded Ethernet communication system using the WIZnet W5500 controller.

This project demonstrates how an embedded system can implement stable Ethernet communication using the WIZnet W5500 Ethernet controller.

ESP32+W5500 이더넷 하드웨어 설계 및 MicroPython 드라이버 구현