Smart Factory Monitoring System using Arduino, W5500 Ethernet, PICSimLab, and ThingsBoard for real-time industrial monitoring.
Smart Factory Monitoring System using IoT
Sunny_
Views 340

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,102 projects
Smart Factory Monitoring System using Arduino, W5500 Ethernet, PICSimLab, and ThingsBoard for real-time industrial monitoring.
Smart Factory Monitoring System using IoT
Sunny_Views 340
Comments 0
Lumox Firmware
Lumox Firmware
scottViews 470
Comments 0
ESP32 SMS gateway using W5500 Ethernet, GSM modem, web UI, MQTT, and OTA for reliable wired field alerts.
ESP32-SMS-SRV
TheoImViews 443
Comments 0
MeshCore is an open-source LoRa mesh project for encrypted off-grid messaging without internet or cellular networks.
meshcore
Aimee0Views 351
Comments 0
Xentient
Xentient
Aimee0Views 278
Comments 0
DIY Aliro Smart Lock
DIY Aliro Smart Lock
Aimee0Views 354
Comments 0
ESP32-S3-OSC-8Relay
ESP32-S3-OSC-8Relay
masonViews 378
Comments 0
smart-factory-robot-arm
Smart Factory: Open-Source Industry 4.0 Robot Arm with YOLO Vision and Siemens PLC Integratiion
viktorViews 503
Comments 0
matter-esp32-modbus-tcp-bridge
matter-esp32-modbus-tcp-bridge
masonViews 527
Comments 0
Open-source rover propulsion system using ESP32 + WIZnet W5500, controlling four ODrive motors over CAN bus via MQTT.
ORION_VI_PROPULSION_SYSTEM
Grace_KooViews 391
Comments 0
micro-ROS bridge on RP2040 + WIZnet W6100 forwarding ROS2 cmd_vel to a Sabertooth 2x60 motor driver, with Ethernet UDP transport planned.
SabertoothMicroROSBridge
Grace_KooViews 251
Comments 0
ESP32-S3 AsyncWeb ETH + WiFi
PlatformIO - ESP32-S3-AsyncWeb-ETH-WIFI
sophiaViews 362
Comments 0
An open-source retro SBC built on the W65C816 CPU, using WIZnet W6100 to add hardwired TCP/IP Ethernet connectivity.
X65_BigMiST
Grace_KooViews 300
Comments 0
ESP32-S3 Ethernet + 4G RS485 DTU Box
ESP32-S3 Ethernet + 4G RS485 DTU Box
sophiaViews 381
Comments 0
ESP32-S3 + W5500 open-source soft router firmware with multi-WAN failover across LTE, Wi-Fi, and wired Ethernet.
MWRouter
Grace_KooViews 439
Comments 0
Universal camera recovery tool - shocking dead devices back to life
defib
Lihan__Views 605
Comments 0
Home Assistant integration for the SunRiser 8/10 LED aquarium controller.
ha-sunriser
Lihan__Views 351
Comments 0
ApiaryGuard Pro
ApiaryGuard Pro: Open-Source Enterprise Hive Monitoring with Raspberry Pi and WIZnet Ethernet
viktorViews 409
Comments 0
Network-attached PDU (Power Distribution Unit) controller for the Raspberry Pi Pico (RP2040), replacing the original PIC18-based firmware.
CroPDUster: Open-Source Network-Attached PDU Control with WIZnet Ethernet
viktorViews 319
Comments 0
WIZ750SR firmware moves from Keil to GNU ARM GCC and CMake, enabling reproducible open builds and easier community contribution.
gcc-cmake-build-wiz750sr
TheoImViews 365
Comments 0
.Built on MC68LC060 and Kintex-7 FPGA, the board combines legacy 68k computing with PCIe, DDR3, and extensive I/O for developers.
A2560Me Mini-ITX Retro Motherboard with 68k CPU and FPGA
Lihan__Views 268
Comments 0
This STC32G12K128 project uses the WIZnet W5500 Ethernet controller to obtain an IP address automatically through DHCP.
How to Use DHCP with WIZnet W5500 on STC32G12K128?
gavinchangViews 353
Comments 0
This STM32F10x education project demonstrates UDP multicast using the WIZnet W5500 Ethernet controller and WIZnet ioLibrary.
How to Build UDP Multicast with WIZnet W5500 on STM32F10x?
gavinchangViews 397
Comments 0
A lightweight SIP registrar/proxy server running on ESP32-S3, with W5500 Ethernet/PoE support for building small wired VoIP networks.
SipServer
matthewViews 983
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?