Wiznet makers

Open-source KiCad PCB design for a 4-universe ArtNet LED controller with RP2040, W5500, USB-C charging, and JLCPCB assembly support

This project is a hardware design for an autonomous wheeled vehicle main control board built around the STM32 Nucleo F446RE.

This project is a compact sub-control board for an autonomous wheeled vehicle that uses a Seeed XIAO SAMD21, a WIZnet W5500 Ethernet module

Devices that need to stay connected without worrying about WiFi interference, the W5500 is my go to choice for adding Ethernet to an ESP32.

The ESP32-S3-ETH is a powerful microcontroller module manufactured by WAVESHARE (Part ID: ESP32-S3-POE-ETH).

WLED usermod that receives DDP pixel data over W5500 Ethernet while using WiFi for relay control

SLMP C++ Minimal Console App

TextFinder is a lightweight Arduino stream-parsing library designed to extract strings, integers, and floating-point values from incoming text data.

Atom_POE_ENVIII is a wired environmental monitoring project that delivers ENV III sensor data through WIZnet W5500 Ethernet and PoE for stable, installation-fri

KNX W5500

This project introduces the WIZnet W5500 Ethernet controller and explains how it is used in embedded systems.

Building a commercial game show venue — need the most reliable microcontroller setup for buzzers + LEDs +Ethernet

This project explains how to connect an STM32 MCU to the WIZnet W5500 over SPI and use it as the Ethernet communication engine for embedded TCP/UDP applications

Akihabara Robot Pedestrian Paradise

This project demonstrates how to implement reliable TCP/UDP communication using the WIZnet W5500 Ethernet controller with an STM32 MCU.

This project demonstrates how to implement TCP communication using the WIZnet W5500 Ethernet controller on an embedded MCU.

This project explains how to implement efficient audio playback on W55MH32 using I2S with DMA, and extend it to Ethernet-based streaming via TCP or MQTT.

This project explains how to use interrupt mechanisms on the W55MH32 to handle real-time events and transmit them over Ethernet using TCP or MQTT.

This project demonstrates how to use the W55MH32 to output audio via an I2S interface to an external DAC (e.g., CS4344) while integrating TCP-based Ethernet com

This project demonstrates how to implement stable GPIO input handling on the W55MH32 while transmitting button events over TCP.

.

The LIFX App Thinks It's a LIFX Z — Building a DIY Smart Light with Arduino and Ethernet

Open-source, low-cost KVM-over-IP solution. Remotely control physical machines

.