A Java 21 robotics stack linking Jetson control to ODrive motors through a W5100S Ethernet bridge with binary messaging and watchdog safety.
OneTouch: W5100S-Based Ethernet Motor Control and Robotics Messaging Stack
josephsr
Views 203

Comments 0
User Created Content: projects that makers and community members built with WIZnet chips and modules.
2,076 projects
A Java 21 robotics stack linking Jetson control to ODrive motors through a W5100S Ethernet bridge with binary messaging and watchdog safety.
OneTouch: W5100S-Based Ethernet Motor Control and Robotics Messaging Stack
josephsrViews 203
Comments 0
Anomaly detection plays a very important role in many fields to identify abnormalities occurring in the system earlier.
Real-time anomaly detection in electric motor operation noise
brunoViews 146
Comments 0
Mega Solar Tracker: Beating Clouds with GPS and W5500
Mega Solar Tracker
scottViews 163
Comments 0
wiring instructions for connecting a WIZnet W5500 Ethernet module to the M5Stack Cardputer ADV
Adding W5500 Ethernet to the Cardputer ADV with the Official Bruce Wiring Guide
sophiaViews 199
Comments 0
ESP32 and W5500 Ethernet Module Controlled 8-Channel Relay
ESP32 and W5500 Ethernet Module Controlled 8-Channel Relay
gunnViews 205
Comments 0
PBL-MK2025055SB001: Face Detection & Assembly Station SCADA — Where a Face Becomes the Access Key
PBL-MK2025055SB001-ESP32-ModbusTCP
scottViews 165
Comments 0
LoRa mesh networking platform designed to exchange text messages, location data, and telemetry without relying on Internet or cellular infrastructure
MESHCN Firmware: Extending an Off-Grid LoRa Mesh Network with W5100S Ethernet
sophiaViews 138
Comments 0
Migration guide to Zephyr v4.4.0
Migration guide to Zephyr v4.4.0
gunnViews 163
Comments 0
The Smart Farm System is an ESP32 and LoRa-based platform for monitoring cow health, location, activity, and milk quality.
How Could W5500 Ethernet Improve an ESP32 LoRa Smart Dairy Farm Gateway?
sophiaViews 113
Comments 0
This project modifies Bruce firmware for the M5Stack Cardputer ADV to support CC1101, NRF24L01, LoRa, and W5500 Ethernet modules on one portable device.
Cardputer ADV Multi-interface Expansion with CC1101, NR24L01, LoRa, and W5500 Ethernet
sophiaViews 148
Comments 0
Its controller board combines an RP2040 MCU with the WIZnet W5500 Ethernet controller and supports standard ATX power supplies and power-only SAS expanders.
OpenJBOD: An Open-Source Network-Managed JBOD Controller with RP2040 and W5500
sophiaViews 187
Comments 0
The plc-comm-slmp-cpp-minimal project implements Mitsubishi Electric MELSEC SLMP Binary 3E and 4E communication for embedded C++ systems
How to Connect MELSEC PLCs with Binary SLMP 3E/4E on W6300-EVB-Pico2?
viktorViews 193
Comments 0
Open-Locker
Open-Locker
Aimee0Views 121
Comments 0
bitcoinswitch
bitcoinswitch
Aimee0Views 126
Comments 0
OpenThermal
OpenThermal
Aimee0Views 129
Comments 0
DuneOS
DuneOS
Aimee0Views 111
Comments 0
LAN interface for Boiler-System-Bus (BSB) and Local Process Bus (LPB) and Punkt-zu-Punkt Schnittstelle (PPS / H-Bus) used by Elco Thision, Brötje and similar he
BSB-LPB-PPS-LAN
Sunny_Views 126
Comments 0
Ultra-responsive ESPHome external component for the Nuki 5.0 Pro smart lock. Runs the BLE stack on a dedicated FreeRTOS task so the ESPHome main loop never bloc
Nuki 5.0 Pro
Sunny_Views 145
Comments 0
A rapid-prototyping platform for motors on the dual-core C2000 (F28P65x).
Viewer2000
Sunny_Views 102
Comments 0
IOT Data Aggregator
Fluidity
Sunny_Views 128
Comments 0
sg-sdk
sg-sdk
Aimee0Views 121
Comments 0
alc-app-s3
alc-app-s3
Aimee0Views 104
Comments 0
LoRaWAN으로 받은 명령을 W55RP20이 이더넷 TCP로 네트워크 LED 디스플레이에 전달하는, ESP32-S3(LoRa) + W55RP20(이더넷) 2단 브릿지 구조의 시스템
Can LoRaWAN Downlink Commands Control an Ethernet LED Display with W55RP20?
sophiaViews 143
Comments 0
This fully open-source desktop hardware is an AI running status indicator built on WizFi360-EVB-Pico (RP2040 + WizFi360 industrial WiFi module).
Step-by-Step Guide to Building an AI Operating Status Indicator [Fully Open-Source Breakdown]
ruilixin6Views 444
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?