Voltage measurement with the Arduino board: Logging data
Voltage measurement with the Arduino board: Logging data
5
Project description
Having taken the required measurements we can now save data to a file on an SD card. For this project I am using a MEGA because the UNO has too little storage for global variables. There are two main hardware options; An arduino shield, as shown here, which makes all the connections for you, and supports an ethernet port as well as the sd card. This allows readings to be continuously displayed in the form of a web page, as described below. This shows an SD card interface which connects to the Arduino's SPI (serial peripheral interface). Note the numbering for connectors and headers is…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.