Skip to content

K3NG rotator via Ethernet

K3NG rotator via Ethernet

taylor

Published July 19, 2022

121 UCC

7 WCC

49 VAR

Original source (new tab)

Components

Hardware components
Arduino UNO

Arduino - Arduino UNO

x 1

Arduino Ethernet Shield

Arduino - Arduino Ethernet Shield

x 1

Software Apps and online services
Arduino IDE

Arduino - Arduino IDE

x 1

Project description

Original : https://www.egloff.eu/index.php/en/la-technique/arduino/k3ng-rotator-thernet While building up my remote station, i was looking for a solution to control one or 2 azimuth only rotators via the Internet. There are several solutions and i finally adopted the K3NG rotator project i already used for a rotator controller connected via USB to my computer. An Arduino compatible Ethernet shield must be plugged in the Arduino. The Ethernet shield is based on the chip W5100 and compatible with an Arduino UNO. I used an Arduino UNO but the code eats almost all memory and it should advisable…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.