Skip to content

Arduino Ethernet Shield Web Server

Arduino Ethernet Shield Web Server

Components

Hardware components

x 1


x 1

Project description

Original : https://unbrick.id/arduino-ethernet-shield-web-server/ It is based on the Wiznet W5xxx line of Ethernet chips. The pin 10 is used to select the ethernet controller W5100 pin 9 as RESET to the W5100 and pin 4 to select the SD card module. The Ethernet shield connects the Arduino to the Internet. Understanding the Ethernet Shield Web Page Sketch The W5100 Ethernet Shield for the Arduino interfaces with the Arduino over the SPI connector this is the small 4 pin block in the middle of the Arduino. It has a connection speed of up to 10100Mb. The setup is very simple. Wiznet 5100…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.