Generator Monitoring System 'GenMon'

Project description

created by Jesse Davids. Purpose: The purpose of this repo is to monitor 2 different states of power, plus 1 fault detection system. First you have state power, and generator power. These can either be On/Off. The arduino will capture this information and send it to a website, which is hosted on the web server made on the arduino in JSON format. The arduino gets this info from 4 cold-contact switches on the generator. If one wire touches ground, that will pull the pin down, resulting in either a 1 or 0. Example: State power is always on, so the cold-contact switches make contact, sending a…