Multi-Channel IoT Wireless Concentrator V2
Multi-Channel IoT Wireless Concentrator V2
2
Multi-Channel IoT Wireless Concentrator V2
2
Tomas McGuinness uses an ESP32-S3 camera to read heating flow indicators and a W5500 Ethernet link to serve calibrated readings and local history.
How Does W5500 Connect Camera-Based Underfloor Heating Flow Readings to a Browser?
BenjaminViews 70
Comments 0
mikroSDK 2.20.2 adds shared Ethernet APIs for W5500 and W6100, using MACRAW drivers and host-side ARP, ping, DHCP and HTTP examples.
How Does mikroSDK Unify W5500 and W6100 Behind One SPI Ethernet API?
BenjaminViews 44
Comments 0
Ethernet teleoperation, a ROS 2 command bridge and CAN-connected robot control for a 2026 NHK Kosen Robocon team
robo-con-for-Ethernet: W5500 TOE for ROS 2-Connected Robot Control
lawrenceViews 119
Comments 0
Upstream MicroPython fix keeps an active W5500's SPI bus alive through soft reset on STM32 with lwIP, qualified with 60 resets and 20 upload cycles.
Why Did a MicroPython Soft Reset Hang an STM32 with a W5500, and How Does PR #19800 Fix It?
ElenaLeeViews 96
Comments 0
Open-source gateway reads an Amphenol Wilcoxon 883M vibration sensor over RS-485 and serves a PLC, MQTT and a web dashboard through the IRIV's W5500 Ethernet.
How Does a W5500 on the Cytron IRIV Turn a Wilcoxon 883M Vibration Sensor into a PLC-Ready Node?
ElenaLeeViews 178
Comments 0
An RP2350-MINI(ETH) runs an MQTT broker and its live dashboard alone, splitting the W5500's eight hardware sockets into DHCP, web and five MQTT clients.
How Does an RP2350 Run an MQTT Broker and Its Dashboard on a W5500 With No PC Behind It?
Grace_KooViews 70
Comments 0
Apollo Automation's $34.99 CAST-1 turns powered speakers into Music Assistant players; an optional W5500 HAT moves the stream to Ethernet with Wi-Fi fallback.
How Does Apollo CAST-1 Use a W5500 Ethernet HAT for Wired Sendspin Multi-Room Audio?
ElenaLeeViews 162
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?