How to add 5500 Ethernet Shield to Raspberry Pi Pico-(Python)
How to add 5500 Ethernet Shield to Raspberry Pi Pico-(Python)
0
Components
Hardware components
Raspberry Pi - Raspberry Pi Pico
x 1
WIZnet W5500
x 1
WIZnet W5500 Ethernet Shield
x 1
Pico Shield
Project description
The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that enables easier internet connection for embedded systems using SPI (Serial Peripheral Interface) Instructions Circuit Python Installation Download the .uf2 file from the below link. CircuitPython 6.2.0- adafruit-circuitpython-raspberry_pi_pico-en_US-6.2.0.uf2 Push and hold the BOOTSEL button and plug your Pico into the USB port of your Raspberry Pi or other computer. Release the BOOTSEL button after your Pico is connected. It will mount as a Mass Storage Device called RPI-RP2. Drag and drop the CircuitPython 6.2.0 .uf2…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
