Arduino Due + 1.8“ TFT LCD with Joystick and MicroSD

lawrence

Published March 02, 2021

145 UCC

9 WCC

19 VAR

Original source (new tab)

Components

Hardware components

WIZnet - WIZ550io

x 1

Arduino - Arduino Due

x 1

Adafruit 1.8" Color TFT Shield

x 1

Project description

Preparation materials

Hardware : - Arduino board : Arduino Due - TFT LCD Shield : 1.8" TFT LCD with Joystick and MicroSD - Micro-SD Memory card
Software : - TFT LCD Lib. : Adafruit-ST7735-Library - Core Graphic Lib. : Adafruit-GFX-Library - Arduino IDE : IDE 1.5.7 - TFT LCD example : soft_spitftbitmap
Etc - parrot.bmp

Comments

Similar projects you might like

Wire a WIZ550io to an Arduino Nano, update the Ethernet library for W5500, then run the WebServer example to verify wired networking.

Arduino Nano + WIZ550io: A Compact Ethernet Upgrade in 5 Steps (W5500 Hardwired TCP/IP)

junlee0615

Views 996
Comments 0

A complete ESP32 + W5500 TCP client example using SPI Ethernet, static IP, and ESP-IDF 5.5.x. Reliable wired networking for industrial IoT.

ESP32 + W5500 (SPI Ethernet) TCP Client Example — Full Guide

Grace_Koo

Views 707
Comments 0

Ethernet performance comparison between ESP32-S3 with WIZnet TOE and LWIP using iperf tests

[ESP32-S3] Geekble Nano TOE VS LWIP Iperf Performance Test

Lihan__

Views 687
Comments 0

Ported the W5500 to the “Geekble Nano” board created by the YouTuber Geekble, which is based on the ESP32-S3.

[ESP32-S3] Geekble nano - W5500 porting using TOE

Lihan__

Views 523
Comments 0

Ethernet Traffic Monitoring, Blocking Specific IPs, and Custom Firewall Configuration for Network Management Applications

Building a Network Bridge with Raspberry Pi and Wiz550io

Lihan__

Views 1508
Comments 0

This study automates irrigation in bottom-irrigated cabbage beds using WIZnet WIZ550io for real-time moisture monitoring and control.

Measuring Water Content and Irrigation Patterns in a Conventional, Bottom-Irrigated, Water-Retaining

matthew

Views 592
Comments 0

ESP8266 with W5500 Ethernet Shield for Modbus TCP Communication Materials: 1. ESP8266 2. W5500 Ethernet Shield 3. Cable Jumper 4. Pin socket for ESP8266 5. Rel

ESP8266 with W5500 Ethernet Shield for Modbus TCP Communication

matthew

Views 671
Comments 1

Comments