Skip to content

ESPHome GPS/PPS Stratum-1 NTP Server on ESP32-S3 with a W5500 Ethernet Timestamping Path

A GPS 1 PPS pulse disciplines an ESP32-S3 clock to ~5 µs; the W5500 SPI Ethernet path is timestamped so LAN clients see 60–100 µs.

josephsr

Published September 30, 2026

Original author: tiehfoodOriginal source (new tab)

ESPHome GPS/PPS Stratum-1 NTP Server on ESP32-S3 with a W5500 Ethernet Timestamping Path

Components

Hardware components

WIZnet parts

Project description

Overview This project turns a Waveshare ESP32-S3-ETH board and a WD22UGRC GPS module into a Stratum-1 NTP server written entirely as ESPHome external components. A GPS module supplies UTC over NMEA and a 1 PPS pulse on a GPIO; the PPS edge disciplines the ESP32 system clock, and an NTP server running on the device serves that clock to the LAN through the board's W5500 Ethernet interface. Clock accuracy is about 5 µs against GPS, stable over 100 days, while client-visible accuracy is about 60–100 µs, limited by network path asymmetry rather than by the device. The interesting part of the…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like