Skip to content

IRIV IO Controller - Send Sensor readings to IRIV PiControl using MQTT

Tutorial on sending RS-485 humidity & temperature data from IRIV IO Controller to IRIV PiControl via MQTT, with Mosquitto and Paho MQTT setup.

irina

Published August 28, 2025

Original author: Raden FatiOriginal source (new tab)

IRIV IO Controller - Send Sensor readings to IRIV PiControl using MQTT

Project description

Hardware Setup IRIV IO Controller (running CircuitPython) IRIV PiControl (acting as MQTT broker and subscriber) RS-485 Modbus humidity & temperature sensor Ethernet network setup (router/switch, cables, USB-C for power & programming) System Architecture The IRIV IO Controller collects real-time data from the RS-485 sensor. It publishes the data to the MQTT broker (IRIV PiControl). The PiControl, as a subscriber, receives and monitors the data. PiControl Configuration (Broker Role) SSH access to PiControl Install Paho MQTT (pip3 install paho-mqtt) Install and enable Mosquitto (sudo apt…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.