Skip to content

Ethernet/UDP DMX Bridge im Eigenbau

In the Loxone forum , resourceful people, including Robert L. , have been working on a cheap way to build a DMX controller with a network co

gavinchang

Published September 01, 2022

Original author: PATRIK MAYEROriginal source (new tab)

Ethernet/UDP DMX Bridge im Eigenbau

Project description

In the Loxone forum , resourceful people, including Robert L. , have been working on a cheap way to build a DMX controller with a network connection from an Arduino with an Ethernet shield and RS485 converter. The first idea was to connect to the Loxone Miniserver as a replacement for the official DMX extension using a "virtual output" via UDP. Of course, this also works with any other system - for example node-red or everything that speaks UDP. As is well known, UDP does not produce a TCP-ACK, which avoids overhead, but also does not guarantee that a data packet actually arrives. With…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.