W7500x Serial-to-Ethernet Device 펌웨어 문의
MCU & Boards
No replies yet. Be the first to reply.
Join the discussion.
MCU & Boards
No replies yet. Be the first to reply.
Join the discussion.
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
RE: W7500x Serial-to-Ethernet Device 펌웨어 문의
by myidsj ·
W7500x Serial-to-Ethernet Device boot 펌웨어 소스 중 app의 메모리 설정을 app 영역이 아니라 0번지 부터 시작하게 하니 바로 동작을 합니다.
다음은 동작 화면입니다.
GetSystemClock : 48000000 (Hz)
GetSystemClock: 2DC6C00, getTIC100US: 12C0, (12C0)
Network Timeout Settings - RCR: 8, RTR: 2500ms
WZTOE H/W Socket Buffer Settings (kB)
[Tx] 4 2 2 2 2 2 2 0
[Rx] 4 2 2 2 2 2 2 0
=============================================
[W7500] Serial to Ethernet Device
Firmware version: 0.8.0 Develop
- IP assign: Static
- Disabled: [None]
- Disabled (TCP server / mixed mode only)
- 115200-8-N-1 / Flow Control: NONE
- Time: Disabled
- Size: Disabled
- Char: Disabled
- Enabled
- [2B][2B][2B] (Hex only)
- UART-Data: UART0
- UART-Debug: UART2
- Status pin1: PA_10 (PHY link)
- Status pin2: PA_01 (TCP connection)
=============================================
MAC: FF:FF:FF:FF:FF:FF
IP: 192.168.11.2 / Port: 5000
GW: 192.168.11.1
SN: 255.255.255.0
DNS: 8.8.8.8
이게 동작하는 거 맞나요?
boot 소스의 역활과 app 소스의 역활에 대해 자세한 설명 부탁드립니다.