Reg.: Source IP and Port display in Wiz110SR
Serial-to-Ethernet & ConfigTool
No replies yet. Be the first to reply.
Join the discussion.
Serial-to-Ethernet & ConfigTool
No replies yet. Be the first to reply.
Join the discussion.
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
RE: Reg.: Source IP and Port display in Wiz110SR
by jim ·
Dear sivaprakash
What does “Source IP” mean?
If it is Local IP(Host IP), you can see it in config tool.
Refer to [url]http://www.wiznet.co.kr/product-item/wiz110sr/[/url]
Or you can use serial commands through a terminal.
Refer to User Manual.
Thanks.
RE: Reg.: Source IP and Port display in Wiz110SR
by sivaprakash ·
Dear Jim,
If we connect the Wiz110SR to network, we can able to send message from various PC (IP address).
Do we able to get, from which PC or IP the messages are coming?
In the manual and configurator tool, it shows only local IP and Server IP.
RE: Reg.: Source IP and Port display in Wiz110SR
by jim ·
WIZ110SR is only S2E module. There is no function to support your request.
If you want to get advanced APIs, you have to use your MCU and wiznet’s chip(e.g. W5500).
Refer to a Datasheet of W5500.
[url]http://wizwiki.net/wiki/doku.php?id=products:w5500:start[/url]
Thanks.
RE: Reg.: Source IP and Port display in Wiz110SR
by sivaprakash ·
Thanks Jim.
We will look into the other ways to get achieve the same or with other module.
Thanks for your support.