[Update] Auto connection issue when wizfi in client mode
Wireless
No replies yet. Be the first to reply.
Join the discussion.
Wireless
No replies yet. Be the first to reply.
Join the discussion.
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?
RE: [Update] Auto connection issue when wizfi in client mode
by ssekim ·
Hello Danil
If you use enterprise f/w 1.2.x.x, you can use NCMAUTO option as below.
When WizFi210 disconnect to the TCP server, WizFi210 will try to reconnect 1000 times.
[code]AT+WA=DIR-636L
IP SubNet Gateway
192.168.4.126: 255.255.255.0: 192.168.4.1
[OK]
ATS7=1000
[OK]
AT+NCMAUTO=0,1,1
[OK]
AT+NAUTO=0,1,192.168.4.106,7000
[OK]
ATA2
[CONNECT 0]
[OK]
[/code]
RE: [Update] Auto connection issue when wizfi in client mode
by dimas ·
I want to use wizfi as an access point and read the sensor to the microcontroller atmega16, is it possible? how to order wizfi connected by android application
thanks
RE: [Update] Auto connection issue when wizfi in client mode
by wizdaniel ·
hi dimas.
Of course, It is possible that you want to feature.
WizFi210 provide 2 modes and we called the Station mode and the Limited AP mode.
[quote]WizFi210 can operate in Limited AP Mode. WizFi210 doesn’t have any other Ethernet or WiFi interface for Uplink, so any device can’t access to Internet via WizFi210 which is operating as Limited AP. The lack of resources in WizFi210 restricts the number of devices able to join WizFi210.
However, Limited AP Mode of WizFi210 is useful when the mobile device, that has WiFi capability, directly connects to WizFi210 and communicate with it without any other Access Point.
[/quote]
After starting Limited AP and TCP Server of WizFi210, Android APP can communicate with WizFi210 as a TCP Client.
For a more detailed description, please refer to the link below
http://www.wiznet.co.kr/product-item/wizfi210/ - Programmer’s guide
6.2 Limited AP mode
10.4. Limited AP, TCP Server and Auto Connection