Reconnect after loss of Wi-Fi range

Question

Configuration: Device(LED board) + WizFi250 (AP Mode, TCP server Data Mode) firmware 1.0.1.8 Tablet (Android) Client Mode Everything works fine until loss of Wi-Fi range. When WiFi range is restored I can’t exchange data beetween device and tablet. To restore connection a have to: switch do Command mode (+++) close socket (AT+SMGMT=0) switch to Data mode (AT+SDATA) sometime I have to dissconet (AT+WLEAVE) and connect again (AT+WJOIN). The main prolem is that at WizFi250 side I don’t have any information that Clinet loss the range. Also in Command mode there no information about it. I make simple test (loss range emulation): connect tablet to WiFi make any transmission data or command mode from Android application disssconect WIFI in tablet configuration, (application is still working) WizFi250 don,t receive any information about dissconection connect WiFi again 5.Link is broken , I cant send any infrmation from Tablet to WizFi250 Ia any workaround for this problem? Is any timeout to close open socket? Best regards, TeleVox (Sorry for my bad english)

ssekim · Answer

Hello TeleVox It’s not easy to find out status of WiFi between WizFi250 and tablet. How about using the keep-alive-data? In other words, (to check the WiFi status) please use the dummy data(a kind of keep-alive) between android application and WizFi250.

ssekim · Answer

One more thing… A few days ago, a new f/w was released. [url]http://wizwiki.net/wiki/doku.php?id=products:wizfi250:wizfi250firmware:start[/url] Please try it again with the new f/w.

TeleVox · Answer

seekim Can you explain in more detail the operation of AT+SOPT1 command, option 11 Socket Reconnect Options? How it works? Best regards, TeleVox

ssekim · Answer

Hello TeleVox. WizFi250 doesn’t support the function(AT+SOPT1=11) any more. Sorry for that.