Radiation sensor node
sensor node
5
Components
Hardware components
WIZnet - WIZ850io
x 1
Similar projects you might like
MIRAGE uses WIZ850io(W5500) to send stratospheric methane data from ESP32-C5 to ground via UDP.
BX39_MIRAGE_SED
TheoIm-
Views 318
-
Comments 0
AASun V2 is a deployable embedded energy router integrating AC/DC sensing, power, and networking into a single DIN-rail system for real-time solar energy ctrl.
AASun-V2
TheoIm-
Views 348
-
Comments 0
PS-NET002 is a W5500-based wired UDP hoist controller for stable industrial communication.
[ PS-NET002 ] UDP Hoist Converter Using W5500 Wired Ethernet
irina-
Views 502
-
Comments 0
Teensy 3.2 reads pulse/hand sensors, drives solenoid timing, and sends OSC over UDP via WIZ850io or WiFi (ESP8266). Static IP 188.0.1.x. UDP
PulseTank_osc
TheoIm-
Views 485
-
Comments 0
WIZ850io enables stable Ethernet connectivity for grblHAL CNC controllers by offloading TCP/IP to W5500 hardware, ensuring deterministic motion control.
Voron-Documentation
TheoIm-
Views 395
-
Comments 0
This project unlocks a cheap NORVI Arita controller by adding a W5500 Ethernet module and OLED, transforming it into a powerful IoT hub through custom firmware.
Ethernet for Arita: Unlocking Hidden IoT Powers with W5500 Modding
lawrence-
Views 1361
-
Comments 0
Todoro’s CNC uses ESP32-P4 for UI, RP2350 for motion, and W5500 for Ethernet+SD—simple, stable, and fully networked CNC control.
ESP32-P4 + RP2350(grblHAL) + W5500 CNC Controller
TheoIm-
Views 869
-
Comments 0