Control an LED over the Internet via Arduino with Teleduino
This tutorial will guide you through the process of attaching an LED to your Arduino and provide some example Teleduino API calls.
2
Components
Hardware components
Arduino - Arduino UNO
x 1
Arduino - Arduino Ethernet Shield
x 1
Project description
This tutorial will guide you through the process of attaching an LED to your Arduino, and provide some example Teleduino API calls to: Define the pin mode of a pin Turn on the LED Turn off the LED Set the brightness of the LED (using one of the PWM supported pins on the Arduino) Step 1: Prepare an LED In this step we put together an LED that we can easily connect to our Arduino. Parts needed: An LED (we decided to use a 10mm white LED because they look neat) A 1K Resistor (or similar) Some hookup wire (we chose to use some single strand ethernet cable because it's cheap, and connects well to…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.