Skip to content

Arduino Web Server using AJAX

There are many ways to use Arduino to create your own IoT device. One of the easiest is to configure your Arduino as a Web Server.

WIZnet

Published February 21, 2023

Original author: makeriotOriginal source (new tab)

Arduino Web Server using AJAX

Components

Hardware components

Project description

DETAILS

 

The Circuit

Wire the following circuit on your breadboard

Arduino Web Server using AJAX, The Circuit

Testing the results

Open a web browser and go to the IP Address of the server ( the one you set in your code).
If you did everything correctly, you should see a screen similar to this.

Testing the results

The web page should immediately update and tell you that the button is On, and the LED is ON

Testing the results

 

Conclusion

This concludes part 1 of this series. This example can very easily be extended to be more useful, as well as be modified to work on other platforms, like ESP32.
In further parts, I will show you how to extend this very simple server into becoming something much more useful. Please visit again to see the rest of this series.

Arduino Web Server using AJAX, Conclusion

 

DOCUMENTS
Code
Arduino code

Comments

Comments