Skip to content

Arduino Tutorial : AdvancedChat Server

.

WIZnet

Published February 21, 2023

Arduino Tutorial : AdvancedChat Server

Project description

DETAILS

A more sophisticated server that distributes any incoming messages to all connected clients except the one that is sending the message. To use, open a terminal window, Telnet to your devices IP address, and type away. Any incoming text will be sent to all connected clients (including the one typing). Additionally, you will be able to see the client’s input in your serial monitor as well.

 
 

Step 1: What You Need?

1 x Arduino Board ( Arduino UNO used in this tutorial)
1 x Arduino Ethernet Shield

 

 

Step 2: Build Your Circuit.

The Ethernet shield allows you to connect a WizNet Ethernet controller to the Arduino boards via the SPI bus. It uses pins 10, 11, 12, and 13 for the SPI connection to the WizNet. Later models of the Ethernet shield also have an SD Card on board. Digital pin 4 is used to control the slave select pin on the SD card.

Step 2: Build Your Circuit.
 
 
 

Step 3: Upload The Code.

–  Details are explained! You just do step by step!

 
Step 3: Upload The Code.
 
 
Step 3: Upload The Code.

Code_Link

 
 
 

Dated : Tuesday, August 02, 2016

Source :  https://myrobotduino.blogspot.kr/2016/08/advancedchat-server.html

Author : Robot edu


 

Comments

Comments