Skip to content

Arduino Ethernet Library 2.0.0

Arduino Ethernet Library 2.0.0

WIZnet

Published May 17, 2023

Original author: Paul StoffregenOriginal source (new tab)

Arduino Ethernet Library 2.0.0

Components

Hardware components

Project description

Auto-Detect Hardware All 3 SPI-based chips from Wiznet, W5100, W5200, and W5500 are supported. Ethernet.begin() automatically detects which chip you have connected. The chip detection process uses the Wiznet software reset command followed by 2 write and read-to-verify checks on the main configuration register, for very robust hardware detection. Ethernet.init(cspin), an extension added in Adafruit’s Ethernet2 library, is also supported, so you can use any digital pin for the CS signal. Performance Improvement Version 2.0.0 greatly improves performance. Optimizations at multiple levels…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.