Flow-Rate-Monitoring-and-MQTT-Data-Transmission

Project description

Project Overview This project involves using an Arduino to monitor flow rate using a sensor connected to an Ethernet shield. The data is processed and sent to an MQTT server every five minutes. The project leverages NTP (Network Time Protocol) for time synchronization and ensures accurate and timely data transmission. Components Used Arduino (e.g., Arduino Uno, recomended Arduino Mega) Ethernet shield Flow rate sensor Jumper wires MQTT broker (e.g., Mosquitto) Ethernet connection to the local network Libraries Required SPI Ethernet PubSubClient ArduinoJson NTPClient TimeLib Setup…