W55RP20-S2E MQTT client Example (MicroPython)
This example demonstrates MQTT client on W55RP20 S2E via UART/SPI using MicroPython on a Raspberry Pi Pico (Master)
Reset Password
Know your password?
Need an account?
This example demonstrates MQTT client on W55RP20 S2E via UART/SPI using MicroPython on a Raspberry Pi Pico (Master)
Similar projects you might like
Learn to setup your mcGateway to be able to send data to the Ubidots cloud over MQTT.
How to Connect a mcGateway to Ubidots over MQTT – Fast and Secure IoT Integration with W5500
scott
3
5616
0
WIZnet W5300-TOE MQTT publish and Subscribe with Nucleo-f429zi
WIZnet W5300-TOE MQTT publish and Subscribe (micropython)
scarlet
7
5174
5
"micropython-magic" is an extension that allows you to write and run MicroPython code in the Jupyter notebook environment.
micropython-magic
Benjamin
0
6747
0
Arduino-based project that uses ESP32 and W5500 Ethernet modules to connect to an MQTT broker and post messages periodically.
ESP32 Ethernet W5500 MQTT
austin
0
11041
1
This is a demonstration of two Wiznet W5500s running a micropython script that sets one unit as a server, and the other as a client, with a small data packet go
Pico Pi Wiznet W5500 Two-way comms via Ethernet with Micropython
scarlet
0
5778
0
Use the Adafruit IO MQTT to remotely access and control Controllino MEGA PLC. Program with Visuino - Quick and Easy!
Remote Access And Control Controllino With Adafruit Io Mqtt
taylor
0
5312
0
Grabs sensor data via arduino uno and wt100, send the data with mqtt to artik, and send it to kafka broker and logstash, monitors via grafana
MQTT Kafka Raspberry Pi ElasticSearch Cluster
josephsr
0
2564
0
This post delves into WIZnet’s W5300 Indirect Mode with an 8-bit Data Bus.
WIZnet’s W5300 Indirect Address Mode with 8-bit Data Bus
Benjamin
0
6271
0