Acorn_

Complete initialization of the main control board W5500 (static IP configuration) and perform a ping test through a LAN computer.

Lecture on setting up an environment for development in W5500 client mode using [STM32F103ZET6 development board] and W5500 module

Control by docking with smart home master control platform using various sensor modules and other hardware devices

A web application built on an Arduino Mega 2560 microcontroller with an Ethernet connection to a remote web interface used to manage the entire project.

summarize the items that must be checked to use WizFi250-EVB as a shield on the Arduino Board.

Using WizFi250, connect to Twitter Server using a separate proxy server and post messages.

By adding a reset switch to W5100S-EVB-Pico, reset is possible without disconnecting the cable.

Interfacing with a W5300 for network capabilities and a DAC for audio functionalities

Guide post for using DHCP and SNTP services in SURF5

The IoT core receives the MQTT message sent from W5100S-EVB-Pico, sets a rule, and sends outlier data to SNS to receive email notifications.

In an environment where a network is available, time information can be obtained smoothly using the provided NTP library.

Based on the existing STM32 project, a simple LED project was created using surf5.

College students, dive in! Effortlessly control and implement tech projects with your first step using Arduino Ethernet W5100 and Servo Motor.

Among representative CAN applications, we built CANdevStudio, an open source project, and tested the plug-in operation.

This project is using the W5500-EVB and operating embedded web server Please check the below picture