Radar Based Surveillance with Ethernet Integration
We receive detection info from radar.
0
Components
Hardware components
WIZnet - W7500
x 1
Seeed Studio - 24GHz mmWave Sensor
x 1
Project description
Introduction : The seeed studio 24GHz mmWave Sensor is used in this project. It can use UART to send sensor data. But also as per the documentation. The human presence status output interface. You can use the level of these two pins to determine the current human movement in the environment. S1 output: high level - occupied, low level - unoccupied. S2 output: high level - active, low level - stationary. So I am using GPIO read to read the status of the pins and publish on the webserver. I am using webserver example and inserting GPIO read and write functionality. /**…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
