Particle Xenon - Enable Ethernet connectivity with a low cost W5500 module

The preferred option to enable a Xenon to act as a Gateway is to deploy the Particle Ethernet FeatherWing. Unfortunately I didn't have one to hand, however after reviewing the schematics it turns out this FeatherWing simply relies on the WIZnet W5500 Ethernet controller.

From a previous project I did have a W5500 Ethernet Module (which seems to widely available and relatively cheap), so the challenge was to see if the Xenon could work it.

This post on the Particle site covers how to enable Ethernet and fingers crossed your Xenon should connect to the Particle cloud as mine did.