Easyelectronyx pisofi wired sub vendo new design cb testing video
cb has dual power routing to reduce heating on boards by elimating the need to use their linear regulator to power w5500 chip)
2
cb has dual power routing to reduce heating on boards by elimating the need to use their linear regulator to power w5500 chip)
2
ESPHome firmware for an ESP32-S3 + W5500 + LD2450 sensor that tracks up to three targets in polygon zones and reports to Home Assistant over wired Ethernet.
Sensy-One E1: Wired-Ethernet mmWave Presence Sensor for Home Assistant on ESP32-S3 and W5500
josephsrViews 148
Comments 0
K.A.R.R. Safety Core: ROS 2 Robot Safety Control and Ethernet Monitoring System Using ESP32-S3 and W5500
K.A.R.R. Safety Core: ROS 2 Robot Safety Control and Ethernet Monitoring System
Aimee0Views 57
Comments 0
WittelB turns Modbus RS485 devices into Ethernet endpoints with W5500, DIN-rail packaging and a local interface for configuration and register checks.
How Does WittelB WIN-CN-1M-1TCP Use W5500 to Connect Modbus RS485 Devices?
BenjaminViews 47
Comments 0
KinCony AIO Hybrid combines W5500 Ethernet, five manual relay overrides, analog I/O and Tuya interfaces, with current KCS firmware and ESPHome examples.
How Does W5500 Connect the KinCony AIO Hybrid to a Mixed Home Automation System?
BenjaminViews 45
Comments 0
Apollo CAST PRO-1 streams line-level audio to Music Assistant over built-in W5500 Ethernet, with optical output and Wi-Fi in one ESPHome device.
How Does W5500 Bring Analog Audio into Sendspin on Apollo CAST PRO-1?
BenjaminViews 70
Comments 0
Rewired-S uses the WiNet-S2 W5500 interface to expose Sungrow inverter data through local web, MQTT and Modbus TCP, with a new Ethernet recovery feature.
How Does Rewired-S Use W5500 Ethernet for Local Solar Monitoring in Home Assistant?
BenjaminViews 69
Comments 0
An ESP32-S3 runs libssh behind a Flipper Zero app, picking W5500 Ethernet or Wi-Fi per connection, on the author's own 4-layer add-on board with W5500 and RJ45.
How Does a Flipper Zero Run SSH Commands over W5500 Ethernet?
Grace_KooViews 85
Comments 0
Share projects and connect with makers.
Joined before the site update? first.
New to WIZnet Makers?
We sent a verification link to your address. Open it to activate your account, then log in.
Accounts from this email provider are reviewed by an administrator after verification. Approval usually takes one business day.
Already have an account?
Enter your email address. If it belongs to an account, we'll send a link to set a new password. Members who joined before the site update use this to set their password.
If an account uses that address, we sent a link to set a new password. The link works once and expires in 30 minutes.
Know your password?
Need an account?