Embedded 101: PyCharm MicroPython Setup in 37 Mins | Miniconda & Firmware Flashing

It guides configuring PyCharm for Pico MicroPython development with MicroPython plugins, code upload and REPL debugging.

ruilixin6

Published July 30, 2026

187 UCC

Project description

【Preliminary Note】The original hardware example in this article was written based on the RP2040. The actual hardware used in this hands-on demonstration features the W55RP20 as the main controller chip. The circuit logic and UF2 flashing operation principles are universally applicable, with only the main controller model differing. The original chip model mentioned in the circuit descriptions below is provided for reference purposes only. PyCharm PyCharm is an extremely user-friendly Python IDE developed by JetBrains, which supports Windows, macOS and Linux operating systems. For each of…

Keep reading with a free account

Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.

Similar projects you might like

MicroPython uses rp2 module to configure and run RP2040 PIO state‑machines.

MicroPython PIO API Deep‑Dive: StateMachine & PIO Class Methods

ruilixin6

Views 172
Comments 0

Key RP2040 PIO registers cover control, FIFO status, EXECCTRL, SHIFTCTRL and PINCTRL for state‑machine configuration.

In-depth Analysis of 88 PIO: How Control Registers Govern the Operation of the finite-state machine

ruilixin6

Views 144
Comments 0

RP2040 PIO includes side‑set, wrap, FIFO join, auto‑push/pull, fractional divider and flexible GPIO mapping.

PIO Underlying Principles Deep‑Dive: Side‑Set to Instruction Execution

ruilixin6

Views 182
Comments 0

RP2040 PIO‑instructions are 16‑bit wide, split into 3 fields: 3‑bit opcode, 5‑bit side‑set/delay, and 8‑bit parameter.

RP2040 PIO Instruction Set Deep‑Dive: Starting from the Datasheet

ruilixin6

Views 197
Comments 0

pioasm syntax covers identifiers, data types, expressions, labels, instructions with side‑set/delay, and the nop pseudo‑instruction for RP2040 PIO assembly.

Pico PIO Assembly Syntax Deep‑Dive: Identifiers, Instructions & Pseudo‑Instructions

ruilixin6

Views 187
Comments 0

RP2040 PIO state‑machines use pioasm instructions, shift registers and side‑set, with GPIO mapping and IRQ flags for multi‑state‑machine synchronization.

RP2040 PIO Programming Model & FSM Principles: Hardware to Working Logic

ruilixin6

Views 223
Comments 0

RP2040 PIO is a programmable‑IO peripheral with two blocks and eight state‑machines, implementing diverse serial/parallel protocols with minimal CPU overhead.

RP2040 PIO: Hardware Architecture & Working Principles Quick Overview

ruilixin6

Views 198
Comments 0