Arduino Serial to Ethernet gateway
Arduino Serial to Ethernet gateway
0
Components
Hardware components
Arduino - Arduino Ethernet Shield
x 1
Arduino board
x 1
Serial shield
x 1
Project description
Makes your RS232 devices network-compatible. A simple sketch with several additional features. Checked to work with different scientific equipment like XGS600 gauges controller, Agilent turbo pump, Pfeifer vacuum gauge, Thermotek-ag chiller, TDK-Lambda power supply and many others. Features Configure dynamically via telnet on port 24 Save and load serial port configuration from energy independent memory (EEEPROM) Autodetect the device via UDP broadcast messages Talk to the serial device via simple TCP/IP (for example with telnet) Connect to the serial device from multiple computers (up to…
Keep reading with a free account
Guests can read 15 projects per visit. Log in or create a free account to read the full description, open the documents and join the comments.
